Flat Roof Roofer in the Netherlands
Flat roofing work in the Netherlands is typically fast-paced, detail-heavy, and weather-aware. This page describes a realistic Flat Roof Roofer role: waterproofing systems (membranes/bitumen/EPDM), repairs, and clean finishing around drains, edges and penetrations. Openings are project-based and may vary by site type.
Why this role exists (hiring story)
Many Dutch projects combine refurbishment and new build: logistics roofs need quick waterproofing windows, residential blocks need careful detailing, and maintenance teams need roofers who leave a clean, testable result. This role is built around reliability: measure twice, seal once, and document what you did so the next inspection is easy.
What you’ll do on a typical day
- Set up safely: access routes, edge protection, fall-arrest where required, and a short safety briefing before roof work begins.
- Prepare surfaces: clean substrate, check moisture, install or adjust insulation layers, and prime where the system requires it.
- Install waterproofing: lay membranes (bitumen/EPDM/PVC depending on project), align overlaps, and finish seams to spec.
- Detailing that matters: corners, parapets, skylights, ducts, drains and roof edges—watertight finishes are the job.
- Repairs & diagnostics: trace leaks, cut and patch correctly, and leave the area tidy and inspectable.
The exact mix depends on the site (commercial vs residential) and the season; wind and rain planning is part of flat-roof reality.
Materials, methods & tools you may use
Waterproofing systems
- Bitumen membranes (torch-on or site-approved method)
- EPDM sheets (bonding, edge finishing, penetrations)
- PVC/TPO membranes (details, overlaps, terminations)
- Insulation boards and vapour control layers (as specified)
Typical kit
- Hand tools for cutting, rolling, measuring and finishing
- Seam/edge tooling as required by the system
- PPE: gloves, eye protection, safety footwear, harness where required
- Safe access equipment and site protections (per rules)
Tools and exact methods are always project-defined; you are expected to follow site rules and manufacturer/system guidance.
Pay (gross), overtime & typical allowances
Indicative gross hourly pay: €17.5–€22.5 gross/hour. Final pay depends on your experience level, the province, the project’s scope, and whether overtime/weekend work applies.
- Overtime / irregular hours: may be paid with additional allowances depending on project rules.
- Travel: some assignments include travel reimbursement or organized transport; details are confirmed before start.
- Accommodation: on certain projects it can be arranged; on others you secure your own housing.
- Deductions: if accommodation/transport is provided, deductions (if any) are communicated transparently before you accept.
This page shows gross amounts only (brutto). Your net pay depends on your individual tax and payroll situation.
Candidate fit
You are a good fit if you…
- have hands-on flat roofing experience (membranes, detailing, repairs)
- treat edge work, drains and penetrations as the “make-or-break” of the job
- can work safely at height and follow site access rules without shortcuts
- keep your area clean and leave a roof that can be inspected confidently
- communicate basic work and safety points in English (or are improving fast)
- can handle physical work and changing weather conditions
- show up on time and keep a steady pace without sacrificing quality
This role is not for you if you…
- avoid working at height or do not follow fall-protection rules
- prefer “quick patches” over proper preparation and sealing
- cannot handle outdoor work in wind/rain planning windows
- expect a fixed location every time (projects can move)
Requirements & safety expectations
- Experience: proven flat-roof work (installation and/or repairs). Assistant roles are possible only when explicitly agreed.
- Safety mindset: follow site rules, use PPE, and respect exclusion zones and weather stop criteria.
- Working at height: confidence on roofs and safe movement on site are essential.
- Quality: consistent detailing (edges, corners, drains, penetrations) and a clean finish.
- Language: basic English for safety instructions is expected on most sites.
- CV: CV in English is required for review and selection.
Some sites request a safety credential (e.g., VCA) depending on client requirements; this is clarified during matching.
Documents & onboarding (Netherlands)
- Identity: valid passport/ID.
- CV: English preferred + proof of experience/certificates if available.
- Right to work: for EU/EEA/Swiss citizens, work authorization is typically straightforward; for non-EU candidates, legal work authorization depends on the employer and role and is confirmed after screening.
- On-site basics: PPE compliance, safety briefing, and job-specific instructions before roof access.
- Admin: project onboarding can include site registration and basic reporting routines depending on the client.
For questions, use the contact page: https://mavial.pl/kontakt.html.
FAQ
Is this mostly installation, repairs, or both?
Most projects blend both. You may install a full system on one roof area while doing repairs and detailing on another, especially around drains, edges and penetrations.
Do you work only on commercial buildings?
No. Assignments can be commercial, residential blocks, or logistics/industrial rooftops. The site type is confirmed before you accept the job.
Are the wages shown net or gross?
Gross (brutto) only. Net pay depends on payroll and individual tax situation. Overtime/allowances (if applicable) can change the final outcome.
Can accommodation or travel support be included?
Sometimes. It depends on the client and project setup. If accommodation/transport is provided and any deductions apply, you receive the details before start.