MaViAl

Tire Technician Jobs in Canada

Sector: Automotive & Fleet Maintenance · Typical gross pay: 18–30 CAD/hour (higher for commercial/heavy-duty) · Typical locations: Ontario (Toronto / GTA), Alberta (Calgary / Edmonton), British Columbia (Vancouver)

CV REQUIRED: candidates without a CV are not considered. Upload your CV: mavial.pl/en/cv.html.
Last updated: —
Page: /tire-technician.html
Back to sector list

Pay snapshot (gross) and what drives the rate

Employers typically pay hourly, and the rate moves based on province, shop type (retail vs fleet), union/non-union settings, experience, and overtime patterns. Pay below is indicative and must be treated as a range.

18–30 CAD/hour (typical gross) Overtime often after 40–44 hours/week (province dependent) Commercial/heavy-duty can rate higher

Practical reality: busy seasons (winter/summer tire changeovers) often increase hours and overtime opportunities.

Hiring story (what employers usually need)

Tire shops and fleet service bays in Canada hire tire technicians when throughput matters: fast, safe installs; correct torque; clean balancing; and consistent quality under pressure during changeover peaks.

What gets noticed:
  • Steady pace without shortcuts
  • Correct lift points, torque specs, and safe wheel handling
  • Good communication with the bay lead and service advisor

Candidate fit in 60 seconds

This section is designed to help candidates self-qualify quickly (and reduce irrelevant applications).

You are a good fit if you…
  • Can mount/dismount and balance tires confidently (passenger/light truck or commercial)
  • Understand safe lifting, wheel torque procedures, and basic shop safety
  • Stay accurate when the shop gets busy (changeover peaks, multiple vehicles in queue)
  • Can do basic puncture checks and repairs when allowed by shop policy
  • Handle wheels/tires physically and work on your feet for most of the shift
  • Are comfortable with basic TPMS steps (identify sensors, resets/relearn where applicable)
  • Communicate clearly in English for jobsite/shop instructions
This role is not for you if you…
  • Dislike physical work, noise, or fast-paced shop environments
  • Regularly skip safety basics (PPE, lift points, torque discipline)
  • Expect a desk-based role or customer-only work with minimal hands-on tasks
  • Cannot work flexible hours during peak periods (when required)

Day-to-day tasks

  • Mounting/dismounting tires and installing wheels using shop equipment
  • Balancing tires and verifying vibration/fit issues (as per shop process)
  • Inspecting tire condition (tread, sidewall, bead area) and flagging safety concerns
  • Performing basic puncture checks and repairs where permitted (patch/plug per policy)
  • TPMS-related basics: sensor handling, resets/relearn steps (shop-dependent)
  • Maintaining bay cleanliness: tools, waste, tire storage and labeling
  • Supporting seasonal tire changeovers (winter/summer swaps) with accuracy and speed

Requirements and nice-to-haves

Skills & experience

  • Hands-on tire service experience is preferred (training may be possible for strong candidates)
  • Comfort using a tire changer, balancer, torque wrench, and impact tools (as allowed)
  • Ability to follow procedures, torque specs, and safety instructions consistently
  • Basic English for shop communication (A2+ as a practical baseline)

Certificates / licensing (when relevant)

  • Valid driver’s license can be required for some employers (e.g., moving vehicles in/out)
  • Commercial/heavy-duty settings may require additional safety training (site-dependent)
  • Trade licensing/Red Seal is typically associated with broader automotive trades; for tire-only roles it may be optional, but always employer/province dependent

Physical demands & safety mindset

  • Frequent lifting and wheel handling (weights vary by tire size/type)
  • Standing, bending, kneeling, and working in a noisy environment
  • Strong safety awareness around lifts/jacks, rotating tools, and vehicle movement

Note: Specific requirements vary by employer and province. If details differ on a project, the employer’s policy applies.

Related roles in Manufacturing & Maintenance

Internal links to similar vacancies

Production Worker
Pay: 16–28 CAD/h · Locations: Quebec (Montreal), Ontario, New Brunswick / Nova Scotia
 Assembly Line Worker
Pay: 16–28 CAD/h · Locations: Manitoba (Winnipeg), Saskatchewan (Regina / Saskatoon), Alberta
 Machine Operator
Pay: 26–45 CAD/h · Locations: British Columbia, Ontario, Nova Scotia / Newfoundland
 CNC Machine Operator
Pay: 26–45 CAD/h · Locations: Ontario, Quebec, Alberta, British Columbia
 Packaging Operator
Pay: 26–45 CAD/h · Locations: Ontario (Toronto / GTA), Alberta (Calgary / Edmonton), British Columbia (Vancouver)
 Quality Inspector
Pay: 20–35 CAD/h · Locations: Quebec (Montreal), Ontario, New Brunswick / Nova Scotia
 Maintenance Helper
Pay: 20–35 CAD/h · Locations: Manitoba (Winnipeg), Saskatchewan (Regina / Saskatoon), Alberta
 Industrial Mechanic / Millwright
Pay: 28–48 CAD/h · Locations: British Columbia, Ontario, Nova Scotia / Newfoundland

FAQ

Is a CV required?

Yes. Candidates without a CV are not considered. Please create or upload your CV before applying using mavial.pl/en/cv.html.

How much do tire technicians typically earn in Canada?

Many employers operate in a broad gross range (often around 18–30 CAD/hour), with higher rates possible for commercial/heavy-duty work, strong experience, and overtime patterns. Exact pay depends on province and employer policy.

Do I need experience with TPMS?

It is often preferred. Many shops expect basic TPMS handling (sensor care, resets/relearn steps) but the exact workflow depends on the employer and equipment.

Do I need my own tools?

It depends on the shop. Core tire machines are provided by the employer; some roles may expect basic hand tools. PPE is typically mandatory.

What are the typical locations?

Ontario (Toronto / GTA), Alberta (Calgary / Edmonton), British Columbia (Vancouver). Actual sites vary by employer, season, and project needs.