Scan to BIM USA services with BIM Revit modeling for renovation-ready deliverables
If your team is juggling laser scans, point clouds, and fast renovation schedules, MaViAl can act as your nearshore production partner. We convert registered point clouds into clean, standards-aligned Revit models and documentation—so your US staff stays focused on design decisions, client communication, and permitting.
What we deliver in Scan to BIM USA projects
You keep ownership of the client relationship and design intent. We focus on careful modeling from the point cloud, consistent standards, and production-ready deliverables that integrate into your US workflows.
1) Clean Revit as-built model (RVT)
Structured categories, consistent naming, and practical modeling boundaries for renovation work.
2) Views built for coordination
Plans, sections, elevations, and 3D views organized with view templates and filters your team can reuse.
3) Sheets and documentation support
Sheet sets, keynotes (if provided), dimensions, and schedules aligned to your title blocks and standards.
4) Model hygiene + QA/QC notes
We flag scan occlusions, uncertain geometry, and “needs confirmation” areas so your PM isn’t guessing.
5) Optional coordination checks
Clash and interference review against design models (Revit/Navisworks) when coordination is part of scope.
6) Hand-off aligned to your pipeline
Worksets, exports, and transmittals packaged for BIM 360 / ACC or your preferred file structure.
How our point cloud to BIM workflow works
The goal is repeatability: a clear kickoff, controlled modeling rules, predictable review points, and a final handoff that doesn’t require rework.
Step-by-step production (what you can expect)
| LOD target (example) | Best for | Typical modeling approach |
|---|---|---|
| LOD 200 (concept / massing) | Early planning, feasibility | Major walls, slabs, primary openings, key heights; limited detailing. |
| LOD 300 (renovation-ready) | Design + coordination | Modeled elements match scan intent; doors/windows/openings sized; consistent levels and grids. |
| LOD 350 (interfaces emphasized) | Complex renovations | More connection detail at intersections; improved coordination geometry in key zones. |
Accuracy and tolerance are confirmed per project. If your client has strict requirements, we document the rules and produce a short “modeling notes” section inside the deliverable set.
Scan to BIM scope by discipline (what we model)
Point clouds vary. So we define the modeling boundary up front—what is included, what is excluded, and what is marked for confirmation.
Architectural as-built
Walls, floors, ceilings, roofs (as needed), doors/windows/openings, stairs, rooms, key finishes where agreed.
Structural (as requested)
Columns, beams, slabs, major structural walls, and primary framing where scan visibility supports it.
Basic MEP (as requested)
Main runs and major equipment when needed for coordination—modeled at a practical level for renovation decisions.
QA/QC and secure handling for Scan to BIM USA
Production speed only matters if the model is reliable. Our QA/QC is checklist-driven and documented so your BIM lead can review quickly.
Quality checks we run
- Alignment checks against the point cloud in key zones (levels, grids, primary dimensions).
- Consistency audits for categories, families, naming, and view organization.
- “Red flag” notes for occlusions, reflective surfaces, and geometry that needs field confirmation.
- Sheet and view hygiene: no cluttered views, clean filters, and usable documentation.
Data security options
- NDA available on request for sensitive building portfolios.
- Secure file transfer, controlled access, and segmented project storage.
- VPN access can be used when you require work inside your environment.
If you have client-specific compliance requirements, we’ll align the workflow during kickoff.
A short “real-world” story (why process matters)
The point: a good as-built model is not “everything modeled.” It’s the right things modeled, organized the right way, with uncertainty clearly flagged.
FAQ: Scan to BIM USA
Answers below are practical and based on typical production constraints in point cloud to Revit projects.
How fast can you start?
After receiving a sample point cloud and scope notes, we can propose a pilot plan and begin once access and standards are confirmed.
Do you work with both East and West Coast teams?
Yes. From Poland we overlap daily with the East Coast and part of the West Coast, which supports real-time review cycles.
Will the Revit model match our office standards?
That’s the goal. We follow your templates, naming, worksets, and view rules so the output blends into your pipeline.
What do you need from us to avoid rework?
Clear LOD/tolerance expectations, any “do not model” items, and a short list of views/sheets your team actually uses.
Can you coordinate against design models?
Yes, when included in scope. We can run coordination checks in Revit/Navisworks and report conflicts in a clear list.
Do you support portfolio work (many buildings)?
Yes. Portfolio workflows benefit most from a documented standard and repeatable review checkpoints.
Talk to MaViAl about Scan to BIM USA services
Share your building types, typical square footage, disciplines, and the LOD you need. If you can, include a small sample point cloud. We’ll respond with a clear scope plan and next steps—built for US delivery expectations.
MaViAl Sp. z o.o. — BIM & Revit support studio based in Wrocław, Poland.
We support US-based architects, engineers, contractors, and design-build teams with Scan to BIM USA production for renovations, retrofit programs, and facility documentation.
- Phone / Viber / Telegram / WhatsApp: +48 536-198-779
- Email: vialtim@gmail.com
Request a scope review
Send basic project details. If you can’t attach files here, paste a share link in the message field.